|
A number of terms are used to refer to CDMA implementations. The original US standard defined by QUALCOMM was known as IS-95, where IS refers to an Interim Standard of the US Telecommunications Industry Association. IS-95 is often referred to as the second generation (2G) cellular, or as cdmaOne (the QUALCOMM brand name). CDMA has been submitted for approval as a mobile air interface standard to the International Telecommunication Union (ITU).
Whereas Global System for Mobile Communications (GSM) is a specification of an entire network infrastructure, CDMA relates only to the air interface — the radio portion of the technology. For example, GSM specifies an infrastructure based on internationally approved standard, while CDMA allows each operator to provide network features it finds suitable. On the air interface, the signalling suite (GSM: ISDN SS7) work has been progressing to harmonise these features.
After some revisions, IS-95 was superseded by the IS-2000 standard (CDMA2000). This standard was introduced to meet some of the criteria laid out in the IMT-2000 specification for third generation (3G) cellular. It is also called 1xRTT which means "1 times Radio Transmission Technology" because IS-2000 uses the same 1.25 MHz carrier shared channel as the original IS-95 standard. A related scheme, called 3xRTT, uses three 1.25 MHz carriers for a 3.75 MHz bandwidth that would allow higher data burst rates for an individual user, but the 3xRTT scheme has not been commercially deployed. More recently, QUALCOMM has led the creation of a new CDMA-based technology called Evolution-Data Optimized (1xEV-DO, or IS-856), which provides the higher packet data transmission rates required by IMT-2000 and desired by wireless network operators.
This CDMA system is frequently confused with a similar but incompatible technology called Wideband Code Division Multiple Access (W-CDMA) which is the basis of the W-CDMA air interface. The W-CDMA air interface is used in the global 3G standard UMTS and the Japanese 3G standard FOMA, by NTT DoCoMo and Vodafone; however, the CDMA family of US national standards (including cdmaOne and CDMA2000) are not compatible with the W-CDMA family of ITU standards.
Another important application of code division multiplexing — predating and distinct from CDMA — is the Global Positioning System (GPS).
The QUALCOMM CDMA system includes very accurate time signals (usually referenced to a GPS receiver in the cell base station), so cell phone CDMA-based clocks are an increasingly popular type of radio clock for use in computer networks. The main advantage of using CDMA cell phone signals for reference clock purposes is that they work better inside buildings, thus often eliminating the need to mount a GPS antenna outside a building.
Macro diversity usage
|
